Fence Supply Inc. Learning Center

You’ll be proud of your RED SNAP’R equine fence because its safe for your horses and has that beautiful "white rail" look.

Besides being very effective and safe for your horses, it is cost effective to install and requires little maintenance after setup. A RED SNAP’R equine fence system will last for years and can be easily installed, expanded or modified

Part Number: 33B

This compact model charges the fence line with a continuous current of medium-high voltage. Typical applications would include small lots or pastures where weeds are easily controlled or removed.

Part Number: RS3

Positioned between models 33B and 66B in terms of performance, price, and size.

It's intermittent pulse design permits it to be used with polywire and polytape, unlike model 33B.

Part Number: 44B

This model is designed for fences up to 10 miles in length where weeds are easily controlled or removed. It's ideal for pastures where electricity is not readily available.

Part Number: 66B

This model is designed to shock through a moderate quantity of weeds and fences up to 15 miles in length.

Available for 220-240 Volt • 50/60 Hz electrical systems.

Part Number: 88B

This model is designed to shock through a moderate quantity of weeds and fences up to 20 miles in length.

Available for 220-240 Volt • 50/60 Hz electrical systems.

Part Number: CT1

This model is designed for use in dairy barns and small enclosures. It has a choice of three voltage settings to meet your training needs.

Part Number: LIS10

The Red Snap'r LIS10 Solar Powered Electric Fence Controller is the original one-piece solar powered fencer. It's one-piece design and compact shape make it one of the most portable fencers on the market and ideal for pastures where access to electricity is not readily available. The built-in handle makes it easy to carry and install.

This model comes equipped with a fully-charged 6 Volt, 12 amp-hour gel cell battery which can operate the fencer for up to two weeks in total darkness. During daylight hours, the solar panel charges the battery to keep it at full power.

Part Number: LIS3

The miniature version of the LIS10. Like the LIS10, this model has the same one-piece design and built in handle for easy portability. This unit is ideal for smaller applications, such as pet control, gardens, paddocks, and smaller pastures.

This model comes equipped with a fully-charged 6 Volt, 4.5 amp-hour gel cell battery which can operate the fencer for up to two weeks in total darkness. During daylight hours, the solar panel charges the battery to keep it at full power.

Part Number: PF1

For fences up to one mile in length where weeds are easily controlled or removed.

Available for 220-240 Volt • 50/60 Hz electrical systems.

Part Number: PF1K

The Pet Fencer Kit contains everything needed to install a complete fencing system for pets. The Kit includes one model PF1 Pet Controller Fencer, grounding rod with clamp, 10 each of 24" plastic fence posts, and 100 feet of aluminum fence wire.

Available for 220-240 Volt • 50/60 Hz electrical systems.

Part Number: GP1K

The Garden Protector Kit will help you protect your vegetable garden, flower beds, or shrubs by repelling pets and other small animals. The Kit includes one model PF1 Pet Controller Fencer, grounding rod with clamp, 10 each of 24" plastic fence posts, and 100 feet of aluminum fence wire.

Part Number: SIP48 (Black), WSIP48 (White). 48" tip-to-tip overall length. SIP24 (Black), WSIP24 (White). 24" tip-to-tip overall length.

The Red Snap'r Poly Fence Post is ideal for temporary fence setups, including rotational grazing, temporary corrals, to fence off haystacks or animal control where permanent fencing is not necessary. The post's unique insulator design will accommodate any type of steel wire, poly wire, or poly tape up to 1-1/2 inches and rope up to 1/2 inch in diameter.

Part Number: CX25 (black), YCX25 (yellow), WCX25 (white).

Ideal for preventing pets from digging underneath or climbing over chain link fences. Snap-on design attaches easily and securely to chain link fences. Extends electric fence wire 3-1/2" away from post to protect permanent fences.

Part Number: RS25N (black, no nails), YRS25N, (yellow, no nails), WP25N (black, with nails), YWP25N (yellow, with nails), WRS25N (white, no nails) & WWP25N (white, with nails).

Simple one nail installation. Raised boss for easy removal of nail with a claw hammer. Four raised ribs embed themselves into wood post so insulator won't twist.

Part Number: WPX25N (black), YWPX25N (yellow), & WWPX25N (white).

Extends electric fence wire 5 inches away from post to protect permanent or damaged fences. One nail installation with raised boss for easy nail removal. Built-in ribs imbed themselves into wood post so insulator won't twist. Nails included.

Part Number: TP25N (black), YTP25N (yellow), & WTP25N (white).

One insulator will accommodate T-Posts ranging in size from 1-1/4" to 1-3/8". Features a unique unbreakable snap-on fastening attachment.

Part Number: TPX25N (black), YTPX25N (yellow), & WTPX25N (white).

Extends electric fence wire 5 inches away from post to protect permanent or damaged fences. Features a unique unbreakable snap-on, snap-off fastening attachment which accommodates T-Posts ranging in size from 1-1/4" to 1-3/8".

Part Number: YBSTP25N (yellow).

Fits T-Posts from 1-1/4-inch to 1-3/8-inch and all U-Posts. Snap-on design attaches easily and holds on to post securely.

Part Number: RP25N (black) YRP25N (yellow), WRP25N (white).

This self centering post cavity with spin-on nut will accommodate posts ranging from 1/4" to 9/16" in diameter. Only one size insulator needed for most sizes of posts.

Part Number: SRP25N (black) & YSRP25N (yellow).

Same as RP25N but made to fit "sucker" rod posts from 1/4" to 3/4" in diameter.